diff --git a/.DS_Store b/.DS_Store
index 5b11eb2..1f3c622 100644
Binary files a/.DS_Store and b/.DS_Store differ
diff --git a/README.md b/README.md
index 249dc4b..4db2a6c 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-## A Docker based Home Assistant interface for Voltronic Solar Inverters 
+# A Docker based Home Assistant interface for Voltronic Solar Inverters 
 
 This project [was derived](https://github.com/leithhobson/skymax-demo-Original) from the 'skymax' [C based monitoring application](https://skyboo.net/2017/03/monitoring-voltronic-power-axpert-mex-inverter-under-linux/) designed to take the monitoring data from Voltronic, Axpert, Mppsolar PIP, Voltacon, Effekta, and other branded OEM Inverters and send it to a Home Assistant MQTT server for ingestion...
 
@@ -10,4 +10,71 @@ The program is designed to be run in a Docker Container, and can be deployed on
 
 ----
 
+**Docker Hub:** [`bushrangers/ha-voltronic-mqtt`](https://hub.docker.com/r/bushrangers/ha-voltronic-mqtt/)
 
+![License](https://img.shields.io/github/license/ned-kelly/ha-monitor-api.svg) ![Docker Pulls](https://img.shields.io/docker/pulls/bushrangers/ha-monitor-api.png)
+
+## Prerequisites
+
+- Docker
+- Docker-compose
+- [Voltronic](https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313.TR11.TRC1.A0.H0.Xaxpert+inverter.TRS0&_nkw=axpert+inverter&_sacat=0&LH_TitleDesc=0&LH_PrefLoc=2&_osacat=0&_odkw=solar+inverter&LH_TitleDesc=0) based inverter that you want to monitor
+- Home Assistant [running with a MQTT Server](https://www.home-assistant.io/components/mqtt/)
+
+
+## Configuration & Standing Up
+
+It's pretty straightforward, just clone down the sources and set the configuration files in the `config/` directory:
+
+```bash
+# Clone down sources on the host you want to monitor...
+git clone https://github.com/ned-kelly/docker-voltronic-homeassistant.git /opt/ha-voltronic-mqtt
+cd /opt/ha-voltronic-mqtt
+
+# Configure the 'device=' directive (in skymax.conf) to suit for RS232 or USB.. 
+vi config/skymax.conf
+
+# Configure your MQTT server host, port, Home Assistant topic, and name of the Inverter that you want displayed in Home Assistant.
+vi config/mqtt.json
+```
+
+Then, plug in your Serial or USB cable to the Inverter & stand up the container:
+
+```bash
+docker-compose up -d
+
+```
+
+_Note if you have issues standing up the image on your Linux distribution, you may need to manually build the image - This can be done by uncommenting the build flag in your docker-compose.yml file._
+
+## Integrating into Home Assistant.
+
+Providing you have setup [MQTT](https://www.home-assistant.io/components/mqtt/) with Home Assistant, the device will automatically register in your Home Assistant when the container starts for the first time -- You do not need to manually define any sensors.
+
+From here you can setup [Graphs](https://www.home-assistant.io/lovelace/history-graph/) to display sensor data, and optionally change state of the inverter by "[publishing](https://www.home-assistant.io/docs/mqtt/service/)" a string to the inverter's primary topic like so:
+
+![Example, Changing the Charge Priority](images/mqtt-publish-packet.png "Example, Changing the Charge Priority")
+_Example: Changing the Charge Priority of the Inverter_
+
+**COMMON COMMANDS THAT CAN BE SENT TO THE INVERTER**
+
+_(see [protocol manual](http://forums.aeva.asn.au/uploads/293/HS_MS_MSX_RS232_Protocol_20140822_after_current_upgrade.pdf) for complete list of supported commands)_
+
+
+
+```
+Set output source priority  POP00     (Utility first)
+                            POP01     (Solar first)
+                            POP02     (SBU)
+
+Set charger priority        PCP00     (Utility first)
+                            PCP01     (Solar first)
+                            PCP02     (Solar and utility)
+                            PCP03     (Solar only)
+
+Set other commands          PEa / PDa (Enable/disable buzzer)
+                            PEb / PDb (Enable/disable overload bypass)
+                            PEj / PDj (Enable/disable power saving)
+                            PEu / PDu (Enable/disable overload restart);
+                            PEx / PDx (Enable/disable backlight)
+```
\ No newline at end of file
diff --git a/docker-compose.yml b/docker-compose.yml
index 5f6f0ee..5b64a1b 100644
--- a/docker-compose.yml
+++ b/docker-compose.yml
@@ -3,7 +3,9 @@ version: '2'
 services:
   voltronic-mqtt:
 
-    build: .
+    #build: .
+    image: bushrangers/ha-voltronic-mqtt
+
     container_name: voltronic-mqtt
 
     privileged: true
diff --git a/images/mqtt-publish-packet.png b/images/mqtt-publish-packet.png
new file mode 100644
index 0000000..38162a3
Binary files /dev/null and b/images/mqtt-publish-packet.png differ