initial docker support on x86

2019-05-28 14:27:57 +10:00
commit 7a6b39bf18
23 changed files with 1403 additions and 0 deletions
@@ -0,0 +1,20 @@
+#This is the settings file, all comment lines should start with a hash mark.
+
+# The device to read from...
+# Use: /dev/ttyS0 if you have a serial device or /dev/hidraw0 if you're connecting via USB.
+device=/dev/ttyS0
+
+# How many times per hour is the program going to run...
+# This is used to calculate the PV & Load Watt Hours between runs...
+# If unsure, leave as default - it will run every minute...
+
+# (120 = every 30 seconds)...
+run_interval=120
+
+# This allos you to modify the amperage in case the inverter is giving an incorrect
+# reading compared to measurement tools.  Normally this will remain '1'
+amperage_factor=1.0
+
+# This allos you to modify the wattage in case the inverter is giving an incorrect
+# reading compared to measurement tools.  Normally this will remain '1'
+watt_factor=1.01