initial docker support on x86

2019-05-28 14:27:57 +10:00
commit 7a6b39bf18
23 changed files with 1403 additions and 0 deletions
@@ -0,0 +1,68 @@
+#!/bin/bash
+#
+# Simple script to register the MQTT topics when the container starts for the first time...
+
+MQTT_SERVER=`cat /etc/skymax/mqtt.json | jq '.server' -r`
+MQTT_PORT=`cat /etc/skymax/mqtt.json | jq '.port' -r`
+MQTT_TOPIC=`cat /etc/skymax/mqtt.json | jq '.topic' -r`
+MQTT_DEVICENAME=`cat /etc/skymax/mqtt.json | jq '.devicename' -r`
+
+registerTopic () {
+    mosquitto_pub \
+        -h $MQTT_SERVER \
+        -p $MQTT_PORT \
+        -t "$MQTT_TOPIC/sensor/"$MQTT_DEVICENAME"_$1/config" \
+        -m "{
+            \"name\": \""$MQTT_DEVICENAME"_$1\",
+            \"unit_of_measurement\": \"$2\",
+            \"state_topic\": \"$MQTT_TOPIC/sensor/"$MQTT_DEVICENAME"_$1\",
+            \"icon\": \"mdi:$3\"
+        }"
+}
+
+registerInverterRawCMD () {
+    mosquitto_pub \
+        -h $MQTT_SERVER \
+        -p $MQTT_PORT \
+        -t "$MQTT_TOPIC/sensor/$MQTT_DEVICENAME/config" \
+        -m "{
+            \"name\": \""$MQTT_DEVICENAME"\",
+            \"state_topic\": \"$MQTT_TOPIC/sensor/$MQTT_DEVICENAME\"
+        }"
+}
+
+registerTopic "Inverter_mode" "" "mdi-solar-power" # 1 = Power_On, 2 = Standby, 3 = Line, 4 = Battery, 5 = Fault, 6 = Power_Saving, 7 = Unknown
+registerTopic "AC_grid_voltage" "V" "mdi-power-plug"
+registerTopic "AC_grid_frequency" "Hz" "mdi-current-ac"
+registerTopic "AC_out_voltage" "V" "mdi-power-plug"
+registerTopic "AC_out_frequency" "Hz" "mdi-current-ac"
+registerTopic "PV_in_voltage" "V" "mdi-solar-panel-large"
+registerTopic "PV_in_current" "A" "mdi-solar-panel-large"
+registerTopic "PV_in_watts" "W" "mdi-solar-panel-large"
+registerTopic "PV_in_watthour" "Wh" "mdi-solar-panel-large"
+registerTopic "SCC_voltage" "V" "mdi-current-dc"
+registerTopic "Load_pct" "%" "mdi-brightness-percent"
+registerTopic "Load_watt" "W" "mdi-chart-bell-curve"
+registerTopic "Load_watthour" "Wh" "mdi-chart-bell-curve"
+registerTopic "Load_va" "VA" "mdi-chart-bell-curve"
+registerTopic "Bus_voltage" "V" "mdi-details"
+registerTopic "Heatsink_temperature" "" "mdi-details"
+registerTopic "Battery_capacity" "%" "mdi-battery-outline"
+registerTopic "Battery_voltage" "V" "mdi-battery-outline"
+registerTopic "Battery_charge_current" "A" "mdi-current-dc"
+registerTopic "Battery_discharge_current" "A" "mdi-current-dc"
+registerTopic "Load_status_on" "" "mdi-power"
+registerTopic "SCC_charge_on" "" "mdi-power"
+registerTopic "AC_charge_on" "" "mdi-power"
+registerTopic "Battery_recharge_voltage" "V" "mdi-current-dc"
+registerTopic "Battery_under_voltage" "V" "mdi-current-dc"
+registerTopic "Battery_bulk_voltage" "V" "mdi-current-dc"
+registerTopic "Battery_float_voltage" "V" "mdi-current-dc"
+registerTopic "Max_grid_charge_current" "A" "mdi-current-ac"
+registerTopic "Max_charge_current" "A" "mdi-current-ac"
+registerTopic "Out_source_priority" "" "mdi-grid"
+registerTopic "Charger_source_priority" "" "mdi-solar-power"
+registerTopic "Battery_redischarge_voltage" "V" "mdi-battery-negative"
+
+# Add in a separate topic so we can send raw commands from assistant back to the inverter via MQTT (such as changing power modes etc)...
+registerInverterRawCMD