refactor for better support with ch341 and other unreliable rs232 adapters

2019-07-27 22:34:34 +10:00
parent c9ba895410
commit ccb999b8dc
28 changed files with 800 additions and 774 deletions
@@ -0,0 +1,23 @@
+# Basic configuration options for the actual inverter polling process...
+
+# The device to read from...
+# Use: /dev/ttyS0 if you have a serial device,
+#      /dev/ttyUSB0 if a USB<>Serial,
+#      /dev/hidraw0 if you're connecting via the USB port on the inverter.
+
+device=/dev/ttyUSB0
+
+# How many times per hour is the program going to run...
+# This is used to calculate the PV & Load Watt Hours between runs...
+# If unsure, leave as default - it will run every minute...
+
+# (120 = every 30 seconds)...
+run_interval=120
+
+# This allows you to modify the amperage in case the inverter is giving an incorrect
+# reading compared to measurement tools.  Normally this will remain '1'
+amperage_factor=1.0
+
+# This allos you to modify the wattage in case the inverter is giving an incorrect
+# reading compared to measurement tools.  Normally this will remain '1'
+watt_factor=1.01