include support for MQTT username/password

README.md

@@ -51,7 +51,9 @@ cd /opt/ha-inverter-mqtt-agent
 # Configure the 'device=' directive (in inverter.conf) to suit for RS232 or USB.. 
 vi config/inverter.conf
 
-# Configure your MQTT server host, port, Home Assistant topic, and name of the Inverter that you want displayed in Home Assistant.
+# Configure your MQTT server's IP/Host Name, Port, Credentials, HA topic, and name of the Inverter that you want displayed in Home Assistant...
+# If your MQTT server does not need a username/password just leave these values empty.
+
 vi config/mqtt.json
 ```
 
@@ -62,7 +64,7 @@ docker-compose up -d
 
 ```
 
-_Note if you have issues standing up the image on your Linux distribution, you may need to manually build the image - This can be done by uncommenting the build flag in your docker-compose.yml file._
+_**Note:** builds on docker hub are currently for x64 -- If you have issues standing up the image on your Linux distribution (i.e. Your Raspberry Pi/ARM device) you will need to manually build the image - This can be done by uncommenting the build flag in your docker-compose.yml file._
 
 ## Integrating into Home Assistant.
 

config/mqtt.json

@@ -2,5 +2,7 @@
     "server": "10.16.10.4",
     "port": "1883",
     "topic": "homeassistant",
-    "devicename": "voltronic"
+    "devicename": "voltronic",
+    "username": "",
+    "password": ""
 }

sources/inverter-mqtt/mqtt-init.sh

@@ -6,11 +6,15 @@ MQTT_SERVER=`cat /etc/inverter/mqtt.json | jq '.server' -r`
 MQTT_PORT=`cat /etc/inverter/mqtt.json | jq '.port' -r`
 MQTT_TOPIC=`cat /etc/inverter/mqtt.json | jq '.topic' -r`
 MQTT_DEVICENAME=`cat /etc/inverter/mqtt.json | jq '.devicename' -r`
+MQTT_USERNAME=`cat /etc/inverter/mqtt.json | jq '.username' -r`
+MQTT_PASSWORD=`cat /etc/inverter/mqtt.json | jq '.password' -r`
 
 registerTopic () {
     mosquitto_pub \
         -h $MQTT_SERVER \
         -p $MQTT_PORT \
+        -u "$MQTT_USERNAME" \
+        -P "$MQTT_PASSWORD" \
         -t "$MQTT_TOPIC/sensor/"$MQTT_DEVICENAME"_$1/config" \
         -m "{
             \"name\": \""$MQTT_DEVICENAME"_$1\",
@@ -24,11 +28,12 @@ registerInverterRawCMD () {
     mosquitto_pub \
         -h $MQTT_SERVER \
         -p $MQTT_PORT \
+        -u "$MQTT_USERNAME" \
+        -P "$MQTT_PASSWORD" \
         -t "$MQTT_TOPIC/sensor/$MQTT_DEVICENAME/config" \
         -m "{
             \"name\": \""$MQTT_DEVICENAME"\",
-            \"state_topic\": \"$MQTT_TOPIC/sensor/$MQTT_DEVICENAME\",
+            \"state_topic\": \"$MQTT_TOPIC/sensor/$MQTT_DEVICENAME\"
-            \"retain\": true
         }"
 }
 

sources/inverter-mqtt/mqtt-push.sh

@@ -6,10 +6,14 @@ pushMQTTData () {
     MQTT_PORT=`cat /etc/inverter/mqtt.json | jq '.port' -r`
     MQTT_TOPIC=`cat /etc/inverter/mqtt.json | jq '.topic' -r`
     MQTT_DEVICENAME=`cat /etc/inverter/mqtt.json | jq '.devicename' -r`
+    MQTT_USERNAME=`cat /etc/inverter/mqtt.json | jq '.username' -r`
+    MQTT_PASSWORD=`cat /etc/inverter/mqtt.json | jq '.password' -r`
 
     mosquitto_pub \
         -h $MQTT_SERVER \
         -p $MQTT_PORT \
+        -u "$MQTT_USERNAME" \
+        -P "$MQTT_PASSWORD" \
         -t "$MQTT_TOPIC/sensor/"$MQTT_DEVICENAME"_$1" \
         -m "$2"
 }

sources/inverter-mqtt/mqtt-subscriber.sh

@@ -4,6 +4,8 @@ MQTT_SERVER=`cat /etc/inverter/mqtt.json | jq '.server' -r`
 MQTT_PORT=`cat /etc/inverter/mqtt.json | jq '.port' -r`
 MQTT_TOPIC=`cat /etc/inverter/mqtt.json | jq '.topic' -r`
 MQTT_DEVICENAME=`cat /etc/inverter/mqtt.json | jq '.devicename' -r`
+MQTT_USERNAME=`cat /etc/inverter/mqtt.json | jq '.username' -r`
+MQTT_PASSWORD=`cat /etc/inverter/mqtt.json | jq '.password' -r`
 
 while read rawcmd;
 do
@@ -11,4 +13,4 @@ do
     echo "Incoming request send: [$rawcmd] to inverter."
     /opt/inverter-cli/bin/inverter_poller -r $rawcmd;
 
-done < <(mosquitto_sub -h $MQTT_SERVER -p $MQTT_PORT -t "$MQTT_TOPIC/sensor/$MQTT_DEVICENAME" -q 1)
+done < <(mosquitto_sub -h $MQTT_SERVER -p $MQTT_PORT -u "$MQTT_USERNAME" -P "$MQTT_PASSWORD" -t "$MQTT_TOPIC/sensor/$MQTT_DEVICENAME" -q 1)